Aircraft Component
Manufacturer
Fluorescent-Penetrant Rinse Wastewater
B-Clear™ was used to treat fluorescent-penetrant rinse wastewater from an aircraft component manufacturer. The wastewater contained high levels of oil and grease, phthalates and phenol. It was treated with 0.02 pounds per gallon of B-Clear™, and the treated water was clean enough to meet the stringent discharge requirements of the local POTW.
The following test results are from the manufacturer.
| TEST | UNTREATED WASTEWATER (PPM) |
TREATED WASTEWATER (PPM) |
| Oil and Grease | 841 | < 1.0 |
| BIS-(2-Ethylhexyl Phthalate) | 3.570 | < 0.02 |
| Di-N-Octylphthalate | 5.020 | < 0.02 |
| Phenol | 0.744 | < 0.02 |
| Wastewater Treatment | Stabilization & Solidification | Technical Documents |
| Products | Project Profiles | Contact Information | Site Map | Home |